Electric saver circuit for TV and monitors

There are some electric appliances that must turn ON-OFF together in same time, for example TV and satellite or monitor and computer case,...etc, but sometime you forget one of them.
By this circuit when you run the TV, the satellite turns on automatically and when you turns off the TV the satellite turns off automatically.
The circuit is very simple, when an electric appliance with power consumption more than 10W running, the voltage through diodes 1N5408 increased and the optocoupler runs the relay for switching the second device.
You can use this circuit for any other devices such as desktop computer parts.
It help to electric consumption optimization.

Parts list:
Diode 1N5408(3pcs)
Diode 1N4007
Zener diode 24v 1W
Bridge diode 1A
Optocoupler PC 817
Relay 12v
Resistor 270 ohm 1W
Capacitor 470nF 250v
Capacitor 100uF 50v
Capacitor 22uF 25v


Electric saver circuit for TV and monitors

Electric saver circuit for TV and monitors

Comments

Popular posts from this blog

A2XWY; A2XFY Cables meaning; XLPE cables advantages over PVC cables

Digital Multimeter working principle; DMM working

Wireless voltmeter using Arduino and RF 433MHz receiver and transmitter